When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.

Yoshihiro

85 Pins
 5w
Collection by
This model, called "ZAD" is made of AUS10 at the core of the blade, squeezed into 44 Layers Damascus Steel with Professional Octagonal Handle(Magnolia Wood & Buffalo Horn Bolster).
This model, called "ZAD" is made of AUS10 at the core of the blade, squeezed into 44 Layers Damascus Steel with Professional Octagonal Handle(Magnolia Wood & Buffalo Horn Bolster.
This model, called "ZAD" is made of AUS10 at the core of the blade, squeezed into 44 Layers Damascus Steel with Professional Octagonal Handle(Magnolia Wood & Buffalo Horn Bolster).

ZAD

4 Pins
This is a Yoshihiro Professional Paring/Petty 150 mm, called "V5H" model, made of VG-5 Stainless Steel at the core of the blade, squeezed into Stainless Steel(known as "Warikomi method") with Black Composite Wood.
This is a Yoshihiro Professional Gyuto 210 mm, called "V5H" model, made of VG-5 Stainless Steel at the core of the blade, squeezed into Stainless Steel(known as "Warikomi method") with Black Composite Wood.

V5H

2 Pins
This is a Yoshihiro WGB Professional Sujihiki Slicer 270 mm, made of ALL VG-1 Stainless Steel with Professional Octagonal Handle(Octagonal Magnolia Handle & Buffalo Horn Bolster). Mono Steel Blade type.
This is a Yoshihiro WGB Professional Santoku 180 mm, made of ALL VG-1 Stainless Steel with Professional Octagonal Handle(Octagonal Magnolia Handle & Buffalo Horn Bolster). Mono Steel Blade type.
This is a Yoshihiro WGB Professional Sujihiki Slicer 270 mm, made of ALL VG-1 Stainless Steel with Professional Octagonal Handle(Octagonal Magnolia Handle & Buffalo Horn Bolster). Mono Steel Blade type.

WGB

3 Pins
This is a Yoshihiro RGB Gyuto 210 mm with Octagonal Blue Oak Handle, made of Yasuki Blue Steel #2(Aogami) at the core of the blade, squeezed into Black Forging Finish Steel(called "Warikomi" made by Awase method).

RGB

1 Pin
This model is made of Yasuki Blue Steel #2(Aogami) at the core of the blade, squeezed into traditional KUROUCHI(Black) Finish Steel(called "Warikomi" made by Awase method). Kurouchi Finish is a type of finish where the black oxide surface formed by the quenching is partially left on the blade, emphasized on the partiality of the Knife.
This model is made of Yasuki Blue Steel #2(Aogami) at the core of the blade, squeezed into traditional KUROUCHI(Black) Finish Steel(called "Warikomi" made by Awase method).
This model is made of Yasuki White Steel #2(Shirogami/Aonikou) at the core of the blade, squeezed into traditional Black Forging Finish Steel(called "Warikomi" made by Awase method). Black Forging Finish is a type of finish where the black oxide surface formed by the quenching is partially left on the blade, emphasized on the partiality of the Knife.

KUSP

3 Pins
This model is made of High Carbon Japan Steel(Forged SK4) with Black Composite Wooden Handle.  Taking advantage of Forged SK-4 with sustainable sharpness, this model is manufactured ,one by one, with special quenching & grinding technique in a traditional way, here in Sakai, which can achieve to be easy to resharpen with high durability. These knives get rust in wet condition, but ferrous oxide(Fe203) is harmless to human body.

HGA

1 Pin
This is a Yoshihiro Gyuto with Octagonal Shitan (Rosewood) Handle, made of Aogami Super at the core of the blade, squeezed into Stainless Steel(known as "Warikomi method").
This is a Yoshihiro Professional Bunka 170 mm, made of Aogami Super at the core of the blade, squeezed into Stainless Steel(known as "Warikomi method") with traditional Octagonal Wood Handle.
This model is made of Aogami Super(Yasuki Blue Steel) at the core of the blade, squeezed into Stainless Steel(known as "Warikomi method"), with traditional Octagonal Wood Handle.

Aogami Super

4 Pins
This household model is made of Yasuki Yellow Steel(Kigami) for Left Handed,with Japanese Magnolia Wood Handle & Black Resin Bolster,economical & suitable for Beginners & Normal users.
This model is made of Yasuki Yellow Steel(Kigami) for Left Handed,with D-shaped Handle(Japanese Magnolia Wood Handle & Black Resin Bolster,economical & suitable for Beginners & Normal users.

Kasumi

4 Pins
This is a Yoshihiro Professional Sakimaru Takohiki , called "JOUSAKU" Hongasumi Finish, made of Yasuki White Steel (Shirogami)#2 for Right Handed,with Professional Octagonal Handle(Magnolia Wood Handle & Buffalo Horn Bolster).
This professional model is made of Yasuki White Steel(Shirogami)#2 for Left Handed, with D-shaped Handle(Japanese Magnolia Wood Handle & Buffalo Horn Bolster.
This professional model is made of Yasuki White Steel(Shirogami)#2 for Left Handed, with D-shaped Handle(Japanese Magnolia Wood Handle & Buffalo Horn Bolster.

Jousaku

11 Pins
This model is made of VG-10 Stain Resistant Steel at the core of the blade, squeezed into 44 Layers Damascus Steel with Professional Shitan Rosewood Handle. Beautiful Damascus pattern  Hammered Finish!!!
This model is made of VG-10 Stain Resistant Steel at the core of the blade, squeezed into 44 Layers Damascus Steel with Professional "Buffalo Horn Handle". Beautiful Damascus pattern & Hammered Finish!!!
This model is made of VG-10 Stain Resistant Steel at the core of the blade, squeezed into 44 Layers Damascus Steel with Professional "Buffalo Horn Handle". Beautiful Damascus pattern & Hammered Finish!!!

NSW

4 Pins
This professional Knife model is made of SKD/Powdered Stainless Steel at the core of the blade, squeezed into Stain Resistant Steel with Professional Octagonal Handle(with Buffalo Horn Bolster).
This professional Knife model is made of SKD/Powdered Stainless Steel at the core of the blade, squeezed into Stain Resistant Steel with Professional Octagonal Handle(with Buffalo Horn Bolster).

SKD Powdered Steel

2 Pins
Among Yoshihiro's plenty product lines,1141 is regarded as Western type of Knives series,made in Sakai.Compared with European made,1141 has shown remarkable harden ability and toughness with thinner blade, sharpened by experienced craftsmen, enjoying a great reputation among International users.
This model is made of 8A Molybdenum Vanadium Stainless Steel with Non-Slip Checked Stain Resistant Handle.Among Yoshihiro's plenty product lines,1141-SR is regarded as Western type of Knives series,made in Sakai.Compared with European made,1141-SR has shown remarkable harden ability and toughness with thinner blade
This model is made of 8A Molybdenum Vanadium Stainless Steel with Western style Wooden Handle.  Among Yoshihiro's plenty product lines,1141 is regarded as Western type of Knives series,made in Sakai.Compared with European made,1141 has shown remarkable harden ability and toughness with thinner blade, sharpened by experienced craftsmen, enjoying a great reputation among International users.

1141

8 Pins
This model is made of VG-1 Stain Resistant Steel at the core of the blade, squeezed into Steel(called "Warikomi" made by Awase method) ,with Reinforced Hi-Class Mahogany Wood Handle.VG-1 Steel is one of the most popular Stainless Steel with durable sharpness, also easy to re-sharpen.
This model is made of VG-1 Stain Resistant Steel at the core of the blade, squeezed into Steel(called "Warikomi" made by Awase method) ,with Reinforced Hi-Class Mahogany Wood Handle.
This model is made of VG-1 Stain Resistant Steel at the core of the blade, squeezed into Steel(called "Warikomi" made by Awase method) ,with Reinforced Hi-Class Mahogany Wood Handle.VG-1 Steel is one of the most popular Stainless Steel with durable sharpness, also easy to re-sharpen.

HGW

4 Pins
Yoshihiro Aogami Super Clad Chef's Bunka Octagonal Magnolia Handle
This is a Yoshihiro Professional Bunka 170 mm, made of Aogami Super at the core of the blade, squeezed into Stainless Steel(known as "Warikomi method") with traditional Octagonal Wood Handle.
YuiSenri
YuiSenri
Yoshihiro JOUSAKU White Steel #2, Professional Sakimaru Takohiki
This is a Yoshihiro Professional Sakimaru Takohiki , called "JOUSAKU" Hongasumi Finish, made of Yasuki White Steel (Shirogami)#2 for Right Handed,with Professional Octagonal Handle(Magnolia Wood Handle & Buffalo Horn Bolster).
YuiSenri
YuiSenri
Yoshihiro ZAD AUS10 Clad 45 Layers Damascus Paring Knife 150 mm
This model, called "ZAD" is made of AUS10 at the core of the blade, squeezed into 44 Layers Damascus Steel with Professional Octagonal Handle(Magnolia Wood & Buffalo Horn Bolster).
YuiSenri
YuiSenri
Yoshihiro ZAD AUS10 Clad 45 Layers Damascus Sujihiki 240 mm
This model, called "ZAD" is made of AUS10 at the core of the blade, squeezed into 44 Layers Damascus Steel with Professional Octagonal Handle(Magnolia Wood & Buffalo Horn Bolster.
YuiSenri
YuiSenri
Yoshihiro ZAD AUS10 Clad 45 Layers Damascus Nakiri 165 mm
This model, called "ZAD" is made of AUS10 at the core of the blade, squeezed into 44 Layers Damascus Steel with Professional Octagonal Handle(Magnolia Wood & Buffalo Horn Bolster).
YuiSenri
YuiSenri
Yoshihiro ZAD AUS10 Clad 45 Layers Damascus Santoku 180 mm
This model, called "ZAD" is made of AUS10 at the core of the blade, squeezed into 44 Layers Damascus Steel with Professional Octagonal Handle(Magnolia Wood & Buffalo Horn Bolster).
YuiSenri
YuiSenri
Yoshihiro VG-1 Stainless Steel WGB INOX Professional Sujihiki 270 mm
This is a Yoshihiro WGB Professional Sujihiki Slicer 270 mm, made of ALL VG-1 Stainless Steel with Professional Octagonal Handle(Octagonal Magnolia Handle & Buffalo Horn Bolster). Mono Steel Blade type.
YuiSenri
YuiSenri
Yoshihiro VG-5 GOLD Stainless Steel Clad Paring 150 mm, Sandblasting Finish
This is a Yoshihiro Professional Paring/Petty 150 mm, called "V5H" model, made of VG-5 Stainless Steel at the core of the blade, squeezed into Stainless Steel(known as "Warikomi method") with Black Composite Wood.
YuiSenri
YuiSenri
Yoshihiro VG-1 Stainless Steel WGB INOX Professional Santoku 180 mm
This is a Yoshihiro WGB Professional Santoku 180 mm, made of ALL VG-1 Stainless Steel with Professional Octagonal Handle(Octagonal Magnolia Handle & Buffalo Horn Bolster). Mono Steel Blade type.
YuiSenri
YuiSenri
Yoshihiro VG-5 GOLD Stainless Steel Clad Gyuto 210 mm, Sandblasting Finish
This is a Yoshihiro Professional Gyuto 210 mm, called "V5H" model, made of VG-5 Stainless Steel at the core of the blade, squeezed into Stainless Steel(known as "Warikomi method") with Black Composite Wood.
YuiSenri
YuiSenri
This is a Yoshihiro RGB Gyuto 210 mm with Octagonal Blue Oak Handle, made of Yasuki Blue Steel #2(Aogami) at the core of the blade, squeezed into Black Forging Finish Steel(called "Warikomi" made by Awase method). Osaka Japan, Black Oxide, Design Model, Japanese Traditional, Forging
Yoshihiro Blue Steel #2 Black Forging RGB Gyuto 210 mm Blue Oak Handle
This is a Yoshihiro RGB Gyuto 210 mm with Octagonal Blue Oak Handle, made of Yasuki Blue Steel #2(Aogami) at the core of the blade, squeezed into Black Forging Finish Steel(called "Warikomi" made by Awase method).
YuiSenri
YuiSenri
Yoshihiro White Steel #2 JOUSAKU, Left Handed Deba
This professional model is made of Yasuki White Steel(Shirogami)#2 for Left Handed, with D-shaped Handle(Japanese Magnolia Wood Handle & Buffalo Horn Bolster.
YuiSenri
YuiSenri
Yoshihiro JOUSAKU Yasuki White Steel #2, Left Handed Yanagiba
This professional model is made of Yasuki White Steel(Shirogami)#2 for Left Handed, with D-shaped Handle(Japanese Magnolia Wood Handle & Buffalo Horn Bolster.
YuiSenri
YuiSenri